Care & Maintenance

• To clean the PhotoCake^® Processor Touchscreen, spray a clean cloth with glass cleaner. Never apply or spray liquids directly onto the processor.

• Cleaning the Printheads
  • Load the test paper into the Printer and select Color Test from the PhotoCake^® Processor.
• Cleaning the Ink Cartridges
  • Do not touch the copper contact area or the inkjet plate.
  • If contact is accidentally made, wipe them with a lint-free cloth moistened with water.
  • Do not use alcohol, acetone, or any other cleansers because they can damage the Ink Cartridges.
• Cleaning the Ink Cartridge Jet Plate
  • Press the Feed Forward and Feed Backward buttons on the Printer at the same to access the Ink Cartridge carrier.
  • Open the Printer.
  • Remove the Ink Cartridge by pulling the top of the cartridge toward you.
  • Lightly press on the jets with a lint-free cloth moistened with water to wipe excess ink.
• Cleaning the Service Station
  • Press the Feed Forward and Feed Backward buttons on the Printer at the same time to access the Ink Cartridge carrier.
  • Open the lid of the Printer.
  • Rinse the service station and wiper with warm water.

• To keep the Scanner glass clean, wipe with a glass cleaner and a lint-free cloth. Never apply or spray liquids directly onto the Scanner.

Troubleshooting

• Make sure the cable connections are securely plugged in.

• Be sure that the cartridge carrier is moved back into the service station by pressing the Feed Forward and Feed Backward buttons at the same time.

• Clean the service station at least once a month.
• Inspect the bottom of the Ink Cartridges for dirt or dust.
• Make sure the Ink Cartridges are not overfilled.