PhotoCake® Home PhotoCake® Technical Support View PhotoCake® Catalog Section PhotoCake® II User Guide (PDF) PhotoCake® II Wiring Diagram (PDF)
PhotoCake® II
Care & Maintenance
Controller
- Please have the PhotoCake® II system plugged into a grounded dedicated outlet to provide optimal performance. If no such outlet is available, please ensure that the system is plugged directly into an outlet by itself and away from all large appliances (bug zappers, label makers, walk-in freezers/refrigerators, etc.).
- Never power the system on/off by the Surge-Protected Power Strip.
- Always keep your system covered when not in use.
- To clean the Controller, use a mild glass cleaner on a soft, clean cloth. Never apply or spray liquids directly onto the Controller.
Touchscreen
- To clean the Touchscreen, use a mild glass cleaner on a soft, clean cloth. Never apply or spray liquids directly onto the Touchscreen.
- Do not use pen tips or pointed objects on the Touchscreen as they could damage the screen. For best results, always use the stylus that is included with your PhotoCake® II system.
Troubleshooting
Controller
Controller will not power off by selecting the Shut Down Button
- Press and release the power button located on the front of the Controller.
Controller will not power on by tapping the Touchscreen or pressing the power button located on the front of the Controller
- Verify the Blue “B” labeled power cable is securely connected to the back of the PhotoCake® II Controller and into the Surge Protected Power Strip.
- Make sure the light on the Surge Protected Power Strip is on.
Touchscreen
Touchscreen is displaying something other than what was selected
- Recalibrate the Touchscreen
- Select Configuration.
- Select the Touchscreen icon located on the top left side of the screen.
- Select Touchscreen Calibration and follow on-screen instructions.
Touchscreen is too dark
- Adjust the Contrast
- Select Configuration.
- Select the Touchscreen icon located on the top left side of the screen.
- Adjust the scroll bar to the desired contrast.
Touchscreen is stuck on PhotoCake® II logo
- Check for possible power interference
- Remember to have the PhotoCake® II system plugged into a grounded dedicated outlet to provide optimal performance.
- If no such outlet is available, please ensure that the system is plugged directly into an outlet by itself and away from all large appliances (bug zappers, label makers, walk-in freezers/refrigerators, etc.).
- If any appliances are sharing power with the system, remove them.
- Power off the PhotoCake® II system by pressing the power button located on the front of the Controller. Never power the system on/off by the Surge-Protected Power Strip.
- Using the stylus, tap the Touchscreen to power on the PhotoCake® II system.
